Elcometer là công ty lớn hàng đầu thế giới về lĩnh vực thiết bị đo, đặc biệt là thiết bị đo đạc dùng trong nghành sơn. Sản phẩm của hãng có mặt trong các bộ tiêu chuẩn để làm căn cứ đánh giá chất lượng sơn của nhiều tổ chức trên thế giới. Tại Việt Nam, Elcometer từ lâu đã được biết đến là sản phẩm tốt không thể thiếu trong lĩnh vực đo kiểm sơn : dầu khí, kết cấu, ô tô...
Ngoài ra hãng còn là công ty hàng đầu trong lĩnh vực thiết bị đo đạc không phá hủy NDT và các thiết bị làm sạch bề mặt kim loại...
Toàn Đạt Co., Ltd phân phối sản phẩm Elcometer tại Việt Nam.
Bench Top Flaw Detectors FD800 Elcometer - Máy dò khuyết tật vật liệu
Thông số sản phẩm
Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
The Elcometer FD800 Bench Top Flaw Detector is available in two models: FD800DL and FD800DL+.
The time corrected gain (TCG) feature automatically compensates for sound attenuation through a material, further increasing the performance of the gauge.
Within the grid batching of the FD800DL+ the user has the capability to enter 'OBSTRUCT' on to the grid for easy identification of inaccessible locations to measure.
The FD800DL+ has a 6Gb internal memory and an external SD slot which allows up to 64Gb with full data logging via RS232 data output to ElcoMaster® data management software.
|
Features:
|
| Model & Part Number | FD800DL & FD800DL+ |
| Material thickness digits display |
■ |
| B-Scan cross sectional display |
■ |
| B-Scan with digits display |
■ |
| Scan bar display |
■ |
| Coating thickness display |
■ |
| A-Scan display | + Rectified, - Rectified, Full Waveform (RF) |
| Flaw detection modes | TRIG, DAC, AWS, TCG, Zero Crossing, Flank, Peak |
| Measurement Mode1 | PE, PETP (Temp Compensation), EE (ThruPaint™), EEV, CT (Coating) & PECT |
| Measurement Rate (Thickness Mode) Manual: Scan mode Scan bar display |
4 readings per second 32 readings per second 6 readings per second |
| Measuring Range2 | PE: 0.63 - 30480mm (0.025 - 1,200 inches) PETP: 0.63 - 30480mm (0.025 - 1,200 inches) EE: 1.27 - 102mm (0.050 - 4.000 inches) EEV: 1.27 - 25.4mm (0.050 - 1.000 inch) CT: 0.01 - 2.54mm (0.0005 - 0.100 inch) PECT: 0.63 - 30480mm (0.025 - 1,200 inches) PECT: 0.01 - 2.54mm (0.0005 - 0.100 inch) |
| Measurement Accuracy2 |
± 1% or ±0.1mm whichever is the greater |
| Measurement Resolution | 0.01mm (0.001 inch) |
| Velocity Calibration Range | 256 - 16,000m/s (0.0100 - 0.6300in/ms) |
| Additional Features: | |
| High speed scan mode |
■ |
| Differential mode |
■ |
| Limit alarm mode |
■ |
| B-Scan display speed | adjustable display speed |
| Calibration setups | 6 factory & 64 user-definable setups transferrable to and from a PC archive |
| Gates | 3 fully adjustable gates: start, stop, width & threshold |
| Damping | adjustable; impedance matching for optimising transducer performance |
| Pulser type |
FD800DL: two adjustable square wave pulsers. |
| Gain | manual, automatic gain control (AGC) with 110dB range with 0.2dB resolution |
| Timing | precision TCXO timing with single shot 100MHz 8bit ultra low power digitizer |
| Data logging | • 6Gb internal & up to 64Gb external SD slot • Bitmap graphic capture • sequential and grid logging • Alpha numeric batch identification • OBSTRUCT indicates inaccessible locations |
| Calibration Options | single, two point, velocity & material type |
| Transducer recognition | automatic |
| V-path / dual path error correction | automatic |
| Probe zero | automatic |
| Flaw Detection Mode Features | |
| Automatic Calibration: |
Longitudinal (straight), or Shear (angle) |
| Probe Types: | Single Contact, Dual, Delay & Angle |
| Material Velocity Table: | Contains longitudinal and shear velocities for a variety of material types |
| TRIG | Trigonometric display of beam path, depth, surface distance, and curved surface correction. Used with angle beam transducers |
| DAC | Up to 8 points may be entered and used to digitally draw a DAC curve. Reference -2, -6, -10, (-6/-12), (-6/-14), (-2/-6/-10) dB. Amplitude displayed in %DAC, dB, or %FSH |
| AWS | Automatic defect sizing in accordance with AWS D1.1 structural welding code. |
| AVG/DGS | Automatic defect sizing using probe data. Stores up to 64 custom setups |
| TCG | Time corrected gain. 50 dB dynamic range, 20 dB per microsecond, up to 8 points for curve definition |
| Detection Modes | Zero Crossing, Flank and Peak |
| Display Freeze | Hold current waveform on screen |
| Peak Memory | Captures peak signal amplitude. |
| PRF |
8 to 2000Hz in selectable steps (8, 16, 32, 66, 125, 250, 333, 1000, 2000Hz) |
| Pulse Width | 40 to 400 ns. Selectable step options 40, 80 & 400 ns (labeled spike, thin & wide) |
| Frequency Bands | FD800DL & FD800DL+: Broadband 1.8 - 19 MHz (-3dB). Four narrow bands at 1, 2, 5, 10MHz FD800DL+: Additional narrow bands at 5MHz, 15MHz |
| Horizontal Linearity | +/- 0.4% FSW |
| Vertical Linearity | +/- 1% FSH |
| Amplifier Linearity | +/- 1 dB |
| Amplitude Measurement | 0 to 100% FSH, with 1% resolution |
| Delay | 0 - 999in (25,375mm) at steel velocity |
| Display |
Blanview sunlight readable QVGA TFT colour display. 115.2 x 86.4mm (4.54 x 3.40 inches) viewable screen |
| Display Refresh Rate | 60Hz |
| Units (selectable) | mm or inches |
| Backlight | adjustable brightness |
| Repeatability / Stability Indicator |
■ |
| Battery Type | 6 x AA alkaline |
| Battery Life (approximate) |
12 hours |
| Low Battery Indicator |
■ |
| Battery Save Mode | auto |
| Operating Temperature | -10 to 60ºC (14 to 140ºF) |
| Size (w x h x d) |
216.0 x 165.0 x 70.0mm |
| Weight (including batteries) | 2.04kg (4.5lbs) |
| Case Design | Aluminium case design with gasket sealed end caps, waterproof membrane keypad |
| Transducer Connector Type | LEMO |
| RS232 Interface | Bi-directional |
| Packing List |
Elcometer NDT FD800DL or FD800DL+ gauge, couplant, carry case, user manual, test certificate, 6 x AA batteries, ElcoMaster® software, transfer cablea |
Chi tiết xin vui lòng liên hệ:
Hotline- Zalo: 0983 435 400 ( Mr. Quang) - 0987 005 003 ( Mr. Duan)